Dacia Jogger

The system displays speed limits on the instrument panel according to road signs detected on the side of the road.

It mainly uses information taken from the camera 1 attached to the windscreen behind the rear view mirror.

Depending on the country, the system also uses information from a map subscription to interpret certain signs (town entrance, etc.).

The sign displayed on the instrument panel changes when a road sign is detected by the system.

Once the speed limiter or the cruise control is activated, you can adapt the limited speed setpoint to the speed limit displayed on the instrument panel by the system ("Speed limiter" Speed limiter and "Cruise control" Cruise control).

If the detected speed limit is exceeded, the road sign displayed on the instrument panel is modified to inform the driver.

Location of the camera 1

Make sure the windscreen is not obscured (by dirt, mud, snow, condensation etc.).

Special features

For vehicles with a map subscription:

• if the vehicle is travelling in a country where the speed units differ from those of the vehicle, the system displays the speed limit sign in the unit of the country, alongside the speed limit converted to the unit used by the vehicle’s instrument panel.

• for countries where the speed limit is reduced during rainy weather on some types of roads, the system may alter the detected speed limit after a few seconds of the windscreen wipers being activated.

For vehicles without a map subscription: when driving in a country where speed units differ from those on your vehicle, you can manually select the speed unit shown on the instrument panel (e.g. change the unit from miles to kilometres) in order to display accurate information "Displays and indicators" Displays and indicators.

Note:

The system does not take into account exceptional speed limit measures, such as peak pollution days.

Operation

Activation/deactivation

• To deactivate the sound alert, press button 4 twice in succession. The indicator light on button 4 goes out;
• To reactivate the sound alert, press button 4 once. The indicator light on button 4 comes on.

To activate or deactivate the sound alert, please refer to the multimedia instructions.

Select "ON" or "OFF".

Variation of the limited speed or cruising speed

To adapt the speed limiter, cruise control or cruise control setpoint to the detected speed limit, press switch 11 (RES/+) or 12 (SET/˗).

Temporary unavailability

If the system is unavailable for reasons related to the camera or map data, the symbol or, depending on the vehicle, the symbol is displayed on the instrument panel. If there is still a problem, contact an approved dealer.

The system cannot detect the speed limit if:

• the windscreen is not clean;
• the camera is blinded by the sun;
• there is insufficient visibility (fog, etc.);
• the signs are not legible (snow, etc.) or are hidden (by another vehicle or by trees);
• map information is not up to date.

Note: when the front camera is obscured, the "Front camera no visibility" message appears on the instrument panel. Clean the windscreen area in front of the camera.

Operating faults

When the system detects an operating fault, the or, depending on the vehicle, is displayed on the instrument panel.

In some cases, they are accompanied by the following message:

• « Driving assist unavailable » ;

or

• « Check Front camera » ;

or

• « Check Driving assist ».

Consult an approved Dealer.