Dacia Jogger
Central wheel trim with visible wheel bolts
(e.g. wheel trim 1)
The bolts are directly accessible.
warning
Do not leave the tools unsecured inside the vehicle as they may be projected during braking. After use, make sure the tools are correctly positioned in their housings: avoid the risk of injury.
If wheel bolts are supplied in the tool kit, these bolts should only be used for the emergency spare wheel: refer to the label affixed to the emergency spare wheel.
The jack is designed for wheel changing purposes only. Under no circumstances should it be used for carrying out repairs underneath the vehicle or to gain access to the underside of the vehicle.
Central wheel trim with concealed wheel bolts
(e.g. wheel trim 4)
Remove it using the hubcap tool 2, inserting the tool into the recess 3 provided.
To refit it, turn it so that it is aligned with the rim and clip it in place.
Wheel trim with visible wheel bolts
(e.g. wheel trim 6)
Remove it using the hubcap tool 2, inserting the tool into the valve recess 5.
To refit it, align it with the valve 5. Push the retaining hooks in fully, starting on the side of valve A, followed by B and C, finishing at the side opposite valve D.