Settings

11033_XJI_007_1_image.jpeg

To move the seat forwards or back

Lift and hold the handle 1 to unlock the seat. Release the handle at the desired position and make sure that it is locked.

To raise or lower the seat base

(depending on the vehicle)

Move the lever 2 as many times as necessary upwards or downwards until the required position is reached.

To tilt the seatback

Lift handle 3 and tilt the seatback to the desired position. Release the handle at the desired position and make sure that it is locked.

Heated seats

(depending on the vehicle)

Ignition on:

  • a first press on the switch 4 for the seat concerned activates the heating system at maximum power. Both of the built-in warning lights on the switch light up;
  • a second press decreases the heating to minimum power. One integrated warning light is illuminated;
  • pressing for the third time turns the heating off.

The system automatically regulates the seat temperature. When activated, it will determine if the seat heating is necessary or not.

warning

After making adjustments, make sure that the seatbacks are correctly locked in place.

11033_XJI_008_1_image.jpeg

warning

For safety reasons, carry out any adjustments while the vehicle is stationary.

We would advise you not to recline the seatbacks too far to ensure that the effectiveness of the seat belts is not reduced.

Nothing should be placed on the floor (area in front of the driver) as these objects may slide under the pedals during sudden braking manoeuvres, thus obstructing their use.