Depending on the vehicle equipment, this function allows you to activate/deactivate and adjust some of the vehicle's functions.

Vehicles fitted with a multimedia screen 1

11020_XJI_010_1_image.jpeg

Accessing the settings menu

Refer to the various multimedia instructions for information on accessing the settings.

Adjusting the settings

Select a menu then the function to be modified (the display depends on the vehicle equipment and country):

a) "Access":

  • Unlocking the driver’s door;
  • Lock doors during driving;
  • Opening/closing in "hands-free mode";
  • Remote locking/approach unlocking;
  • Remote locking sound;
  • Silent mode;
  • Automatic locking;
  • Interior welcome.

b) "Wipers":

  • Automatic front wiping;
  • Wiping in reverse.

c) "Parking assistance":

  • Obstacle detection;
  • Parking sensors;
  • With or without sound;
  • Tone type;
  • Volume.

d) "Driving assist":

  • Lane departure warning sound volume;
  • Blind spot;
  • Active braking;
  • Speed warning;
  • Overspeed sound alert;
  • Lane departure prevention;
  • Driver vigilance warning.

Depending on the function, select:

  • "ON" or "OFF" to activate or deactivate it.

Please refer to the multimedia instructions for further information.

warning

For safety reasons, carry out any adjustments while the vehicle is stationary.

Vehicles not fitted with a multimedia screen

11020_XJI_011_1_image.jpeg

Accessing the settings menu on display 2

With the vehicle stopped, press the switch 3 as many times as required to reach the "Settings" tab. Press control 4 or 5 repeatedly to access the "Vehicle settings" menu, then confirm by pressing 6 "OK".

Adjusting the settings

Navigate using control 4 or 5 to select the function to be modified and press control 6 "OK" to confirm (display may vary according to vehicle equipment and country):

a) "DASHBOARD":

  • Language;
  • Unit.

b) "PARKING ASSIST":

  • Beep volume.

c) "DRIVING ASSIST":

  • Lane departure warning sound volume;
  • Blind spot;
  • Active braking;
  • Speed warning;
  • Lane departure warning sensitivity;
  • Lane Keep Assist sensitivity;
  • Lane departure warning vibration;

d) "ACCESS":

  • Unlocking the driver’s door;
  • Lock doors during driving;
  • Opening/closing in "hands-free mode";
  • Remote locking/approach unlocking;
  • Remote locking sound;
  • Silent mode;
  • Automatic locking.

e) "WIPERS":

  • Automatic front wiping;
  • Wiping in reverse;

f) "RESET":

2_ALL_503_1_pictogramme.png function activated

2_ALL_502_1_pictogramme.png function deactivated

g) "MY SAFETY PERSO":

  • Speed warning;
  • Driver vigilance warning;
  • Overspeed sound alert;
  • Lane departure warning.

Once a line has been selected, press the switch 6 "OK" to modify the function.

If you select either "PARKING ASSIST" then "VOLUME" or "DASHBOARD" then "LANGUAGE", you will have to make a further selection (Park Assist sound volume or instrument panel language). In this case, make your selection and confirm it by pressing the switch 6 "OK", the selected value is shown by a 2_ALL_503_1_pictogramme.png in front of the line.

To exit the menu, press 4 or 5 to access "BACK" and confirm by pressing 6 "OK". It may be necessary to carry out this operation more than once.

Please refer to the radio instructions for further information.

tip

The vehicle settings personalisation menu cannot be used when driving. When the vehicle speed exceeds 2 mph (3 km/h), the instrument panel display switches automatically back to trip computer mode.