The presence and location of this equipment depends on the vehicle’s multimedia equipment.

1.

Multimedia screen.

2.

Charging socket.

3.

Steering column controls.

4.

Multimedia socket.

5.

Microphone.

warning

Using the telephone

We remind you of the need to conform to the legislation in force concerning the use of such equipment.

Hands-free telephone integrated control

13016_XJI_029_1_image.jpeg

Use the microphone 5 and the steering column control 3.

warning

Connect accessories with a maximum power of 12 watts only.

Fire hazard.

Charging socket 2 or, depending on the vehicle, 6

The USB socket can be used to charge accessories with a maximum power of 12 watts (5 V) per socket.

Multimedia socket 4

You can use USB socket to access the multimedia content of your accessories.

The various sources can be selected from the multimedia screen and from the steering column controls.

13016_XJI_030_1_image.jpeg

tip

Refer to the equipment instructions for information on how to operate this equipment.

Phone holder A

13016_XJI_031_1_image.jpeg

On vehicles that are equipped, lift the flap 7, place your phone 10 horizontally onto the stand 8 then lower the flap 7 while keeping the phone in position on the stand 9.

warning

For safety reasons, carry out any adjustments while the vehicle is stationary.

Make sure that the telephone is securely held in place between the 8 and 9 stands before use.

warning

Make sure that the telephone is securely held in place in the telephone holder to ensure that it is not thrown onto the occupants during sudden turning or braking.

13016_XJI_033_1_image.jpeg

warning

Using the telephone

We remind you of the need to conform to the legislation in force concerning the use of such equipment.

Removable phone holder B

13016_XJI_034_1_image.jpeg

On vehicles that are equipped, to fit the removable telephone holder B, observe the following instructions:

  • remove the cover 15 (movement C);
  • attach the base 12 of the telephone holder to the component 16 (movement D);
  • pull the clamp 13 to the right;

  • place your telephone in the telephone holder 11 pressing the fixed clamp 14, then release the clamp 13 so that the telephone is firmly held in place between clamps 13 and 14.

To remove the removable telephone holder B, proceed in the reverse order.

Note: You can manually adjust the tilt of the telephone holder 11 to the desired position.

13016_XJI_036_1_image.jpeg

warning

Make sure that the base of the telephone holder is correctly fitted and that the telephone is securely held in place in the telephone holder, so that it is not thrown onto the occupants during sudden turning or braking.

warning

For safety reasons, carry out any adjustments while the vehicle is stationary.

warning

Using the telephone

We remind you of the need to conform to the legislation in force concerning the use of such equipment.