Dacia Jogger
Engine identification
Please quote the engine identification information in area A in all correspondence or orders.
(Location varies depending on engine)
- 1.
Engine type.
- 2.
Engine suffix.
- 3.
Engine serial number.
Please quote the engine identification information in area A in all correspondence or orders.
(Location varies depending on engine)
- 1.
Engine type.
- 2.
Engine suffix.
- 3.
Engine serial number.
Engine specifications
Versions | 1.0 12V | 1.0 TCe | Hybrid | 1.5 dCi | ||
|---|---|---|---|---|---|---|
Engine type (see engine plate) | B4D | H4Dt | H5D | H4M | 5DH | K9K Turbo |
Cubic capacity (cc) | 999 | 1598 | - | 1 461 | ||
Type of fuel Octane rating | Petrol It is essential to use unleaded petrol with an octane rating matching that indicated on the label affixed on the fuel filler flap Fuel tank. | - | Diesel The label located in the fuel filler flap indicates the authorised fuels. | |||
Spark plugs | Only use the spark plugs specified for your vehicle’s engine. The type should be marked on a label stuck inside the engine compartment. If it is not then contact your approved Dealer. Fitting spark plugs which are not to specification may damage the engine. | - | - | |||
Engine specifications
Versions | 1.0 12V | 1.0 TCe | Hybrid | 1.5 dCi | |||
|---|---|---|---|---|---|---|---|
Engine type (see engine plate) | B4D | H4Dt | H5D | H4M | 5DH | K9K | |
Cubic capacity (cc) | 999 | 1598 | - | 1 461 | |||
Fuel types that meet European standards and are compatible with the engines of vehicles sold in Europe (in any other case, contact an Approved Dealer). |
| Unleaded petrol compliant with standard EN 228 containing up to 5% ethanol in volume. | - |
| Diesel fuel compliant with standard EN 590 containing up to 7% fatty acid methyl ester in volume. | ||
| Diesel fuel compliant with standard EN 16734 containing up to 10% fatty acid methyl ester in volume. | ||||||
| Unleaded petrol compliant with standard EN 228 containing up to 10% ethanol in volume. | - | |||||
| Parrafinic Diesel fuel compliant with standard EN 15940 containing up to 7% fatty acid methyl ester in volume. | ||||||
