Dacia Striker
Installation visual for the five-door, five-seat version
Seat not enabling a child seat of this type to be fitted.
Child seat attached using the ISOFIX mounting
Seat allowing an ISOFIX or i-Size child seat to be fitted.
The rear seats are equipped with an anchoring point that enables a universal ISOFIX forward-facing child seat to be fitted. The anchoring points
are on the seatback of the bench seat.
warning
Check that your child is always strapped in and that the belt or safety harness used is correctly set and adjusted Seat belts.
If necessary, adjust the seat position accordingly.
warning
Using a child safety system which is not approved for this vehicle will not properly protect the baby or child. They risk serious or even fatal injury.
warning
It is prohibited to fit a child seat in the adjacent available seat when the seatback is folded down onto the other seats Rear seats.
warning
Fit the child seat in a rear seat wherever possible.
To install a ISOFIX seat in this seat, move the central seat belt out of the way by hand before engaging the locks.
Installation table
The table below summarises the information shown on the installation diagram in order to ensure the regulations in force are respected.
Type of child seat | Weight of the child | Size of seat [fixture] | Front passenger seat | Rear seats | ||
|---|---|---|---|---|---|---|
Without airbag or with airbag deactivated | With airbag activated | Side seats | Centre seat | |||
Carrycot fitted across the vehicle Approved for group 0 | < 10 kg | L1 [F], L2 [G] | X | X | X | X |
Rear-facing shell seat Approved for group 0 or 0+ | < 13 kg | R1 [E] | X | X | IL (1) | X |
Rear-facing seat Approved for group 0+ or 1 | < 13 kg and 9 to 18 kg | R2 [D], R2X [D], R3 [C] | X | X | IL (1) | X |
Forward-facing seat Approved for group 1 | 9 kg to 18 kg | F3 [A], F2 [B], F2X [B1] | X | X | IUF-IL (2) | X |
Booster seat Approved for group 2 or 3 | 15 kg to 25 kg and 22 kg to 36 kg | B2 | X | X | IUF-IL (2) | X |
| B3 | X | X | X | X | ||
Seati-Size | Rear-facing seat | X | X | i-U(1) | X | |
Forward-facing seat | X | X | i-UF (2) | X | ||
Booster seat | X | X | i-UF (2) | X | ||
Refer to the "Child safety equipment" booklet available from the network to choose the seat suited to your child and recommended for your vehicle.
X = Seat not suitable for fitting child seats of this type.
IUF = Seat enabling child seats with "Universal or vehicle-specific" approval to be attached using ISOFIX mountings: check that it can be fitted.
IL = Seat which allows child seats with "Semi-universal" or "Vehicle specific" approval to be attached using ISOFIX attachments; check that it can be fitted correctly.
i-U = Suitable for "Universal" front-facing and rear-facing i-Size restraint devices.
i-UF = Suitable only for "Universal" front-facing i-Size restraint systems.
(1) Before installing a rear-facing child seat, move the front seat of the vehicle forwards as far as possible then, once the child seat is installed, move the front seat backwards as far as possible without it touching the child seat.
(2) Always remove the headrest from the rear seat on which the child seat is fitted. This action must be performed before fitting the child seat Rear headrests. Move the seat in front of the child forwards and adjust the seatback to an upright position to avoid contact between the seat and the child's legs.
The size of the ISOFIX child seat is indicated by a letter:
- F3 [A], F2 [B],F2X[B1] : for forward-facing seats in group 1 (9 to 18 kg);
- R2 [D], R2X [D], R3 [C] : rear-facing child seats or shell seats in group 0+ (less than 13 kg) or group 1 (9 to 18 kg);
- R1 [E] rear-facing shell seats in Group 0 (less than 10 kg) or 0+ (less than 13 kg);
- L1 [F], L2 [G] : carrycots in group 0 (less than 10 kg);
- B2, B3 : booster seats in groups 2 and 3 (15 to 25 kg and 22 to 36 kg).