Removing the headrests A or B

Raise the headrest as far as it will go, then press button 1 and remove the headrest.

Adjusting the height of the headrest B

(depending on the vehicle)

Press the button 1 and simultaneously slide the headrest to the desired height.

Refitting the headrests A or B

Insert the rods in the holes, press button 1, lower the headrest and check that it is securely in place.

13007_RJI_003_1_image.jpeg

Headrest in use position B

(depending on the vehicle)

Lift the headrest fully until it locks. Check that it is correctly locked.

Storage position for the headrest B

(depending on the vehicle)

Press button 1 and lower the headrest completely.

The lowest position of the headrest (position C ) is for storage only: do not set it in this position when the seat is occupied.

warning

The headrest is a safety component, check that it is fitted and in the correct position.