Headlamp beam adjustment :

Control A is used to adjust height of the headlamp beam according to load.

Turn control A anticlockwise to lower the beams and clockwise to raise them.

tip

When driving on the left in a left habd drive (or vice versa), you must adjust your lights temporarily during your stay.

Table of adjustment position examples

Examples of positions for adjusting control A according to the load

Passenger vehicle

Utility vehicle

Only driver

0

0

Driver with front passenger

1

-

All seats occupied

1

-

Driver with passengers and luggage (or load) reaching the maximum permissible all-up weight

2

-

Driver without passengers and luggage (or load) reaching the maximum permissible all-up weight

3

3

Depending on the version.

The ablove table gives some examples. In all cases, adjust control A according to the vehicle so that the road can be seen and other drivers are not dazzled.

Temporary adjustment

Open the bonnet and identify the marking B next to one of the front headlight projectors.

For each headlight, use a screwdriver to turn the screw 1 a quarter of a turn towards the « ˗ » symbol to lower the beams.

Return to the original position once your trip is over: turn the screw 1 a quarter of a turn towards the « + » symbol to raise the beams.