Обновлено

Installation visual for the four-seat version

warning

RISK OF DEATH OR SERIOUS INJURY: before fitting a rear-facing child seat in this seat, make sure that the front passenger airbag has been deactivated .

warning

Using a child safety system which is not approved for this vehicle will not correctly protect the baby or child. They risk serious or even fatal injury.

Child seat attached using the belt

Check the status of the airbag before fitting a child seat or allowing a passenger to use the seat.

Seat which allows a child seat with « Universal » approval to be attached by a seat belt.

2_ALL_046_1_pictogramme.png

Seat not suitable for fitting child seats.

1_ALL_796_1_pictogramme.png

 Seat which allows a child seat with « B2 » approval to be attached by a seat belt.

warning

Check that your child is always strapped in and that the belt or safety harness used is correctly set and adjusted .

If necessary, adjust the seat position accordingly.

The table below summarises the information shown in installation visual to ensure the applicable regulations are respected.

Four-seat version

Type of child seat

Weight of the child

Front passenger seat

Rear side seats

With airbag

deactivated

With airbag

activated

Transverse carrycot

Group 0

< 10 kg

X

X

U (3)

Rear-facing seat

Group 0 or 0+

< 10 kg and < 13 kg

U (1) (2)

X

U (4)

Rear-facing seat

Group 0+ and 1

< 13 kg and 9 to 18 kg

U (1) (2)

X

U (4)

Forward-facing seat

Group 1

9 to 18 kg

X

U (2)

U (5)

Booster seat

Group 2 and 3

15 to 25 kg and

22 to 36 kg

X

U (2)

U/B2 (5)

warning

(1) RISK OF DEATH OR SERIOUS INJURY : before fitting a rear-facing child seat on the front passenger seat, check that the airbag has been deactivated.

X = Seat not suitable for fitting child seats.

U = Seat allowing a child seat with « Universal » approval to be attached by seat belt ; check that it can be fitted correctly.

(2) Move the vehicle seat in the rearmost and highest position and tilt the backrest slightly (25°)

(3) A carrycot can be installed across the vehicle and will take up at least two seats. Position the child with his or her feet nearest the door.

(4) In order to install a rear-facing child seat, move the front seat as far forward as possible, then move the front seat back as far as it will go, without allowing it to come into contact with the child seat. Raise the headrest or remove it.

(5) In all situations, remove the headrest of the rear seat on which the child seat is positioned. This must be done before fitting the child seat. Move the seat in front of the child forwards, move the seatback forward to avoid contact between the seat and the child's legs.

Installation visual for the utility version

Child seat attached using the belt

Check the status of the airbag before or allowing a passenger to use the seat.

2_ALL_046_1_pictogramme.png Seat not suitable for fitting child seats.

warning

For utility version, It is strictly forbidden to install a child seat on the passenger seat.