Dacia Jogger
Rear seat belt reminder
Depending on the vehicle, the graphic 8 is displayed on the instrument panel when the ignition is switched on. This informs the driver of the fastening status of each of the rear seat belts every time:
- the ignition is switched on;
- opening a door;
- a rear seat belt is fasted or unfastened.
Understanding the graphic 8:
- white symbol: seatbelt fastened;
- black symbol: seatbelt unfastened.
When the vehicle speed is below approximately 12 mph (20 km/h), the graphic 8 appears during approximately 60 seconds every time one of the rear seat belts is fastened or unfastened.
When the vehicle speed reaches or exceeds 12 mph (20 km/h), if one of the rear seat belts is unfastened during the journey:
- the
warning light flashes on the central display;
and
- a beep sound for approximately 30 seconds;
and
- the graphic 8 is displayed for at least 60 seconds and the symbol for the seat concerned changes to black.
Always make sure that the rear passengers are properly fastened in and that the number of seat belts indicated corresponds to the number of rear seats occupied.
Depending on the vehicle, the graphic 9 is displayed on the instrument panel when the ignition is switched on. This informs the driver of the fastening status of each of the rear seat belts every time:
- the ignition is switched on;
- opening a door;
- a rear seat belt is fasted or unfastened.
Understanding the graphic 9:
- symbol in green: seat belt fastened;
- symbol in red: seat belt unfastened.
When the vehicle speed is below approximately 12 mph (20 km/h), the graphic 9 appears during approximately 60 seconds every time one of the rear seat belts is fastened or unfastened.
When the vehicle speed reaches or exceeds 12 mph (20 km/h), if one of the rear seat belts is unfastened during the journey:
- the
warning light flashes on the central display;
and
- a beep sound for approximately 30 seconds;
and
- the graphic 9 is displayed for at least 60 seconds and the symbol for the seat concerned changes to red.
Always make sure that the rear passengers are properly fastened in and that the number of seat belts indicated corresponds to the number of rear seats occupied.
Depending on the vehicle, with the doors closed, the graphic 10 is displayed on the instrument panel for approximately 60 seconds when the vehicle ignition is switched on.
This informs the driver of the fastening status of each of the rear seat belts every time:
- the doors are opened during driving (vehicle speed above zero);
- a rear seat belt is fasted or unfastened.
Understanding the graphic 10:
-
seat belt fastened; -
seat belt unfastened.
When the vehicle speed is below approximately 12 mph (20 km/h), the graphic 10 appears during approximately 60 seconds every time one of the rear seat belts is fastened or unfastened.
When the vehicle speed reaches or exceeds 12 mph (20 km/h), if one of the rear seat belts is unfastened during the journey:
- the
warning light flashes on the central display;
and
- a beep sound for approximately 30 seconds;
and
- the graphic 10 is displayed for at least 60 seconds and the
symbol for the seat concerned changes to black.
Always make sure that the rear passengers are properly fastened in and that the number of seat belts indicated corresponds to the number of rear seats occupied.
Depending on the vehicle, with the doors closed, the graphic 11 is displayed on the instrument panel for approximately 60 seconds when the vehicle ignition is switched on.
This informs the driver of the fastening status of each of the rear seat belts every time:
- the doors are opened during driving (vehicle speed above zero);
- a rear seat belt is fasted or unfastened.
Understanding the graphic 11:
- symbol in green: seat belt fastened;
- symbol in red: seat belt unfastened.
When the vehicle speed is below approximately 12 mph (20 km/h), the graphic 11 appears during approximately 60 seconds every time one of the rear seat belts is fastened or unfastened.
When the vehicle speed reaches or exceeds 12 mph (20 km/h), if one of the rear seat belts is unfastened during the journey:
- the
warning light flashes on the central display;
and
- a beep sound for approximately 30 seconds;
and
- the graphic 11 is displayed for at least 60 seconds and the symbol for the seat concerned appears in red.
Always make sure that the rear passengers are properly fastened in and that the number of seat belts indicated corresponds to the number of rear seats occupied.
Estate version second row rear seats
Rear side seat belts
Slowly unwind the belt 12 and the click the buckle 13 into the red catch 14.
Rear centre seat belt
Unwind belt 20 slowly from its housing 15.
Pass the two buckles and the belt 20 in the belt guide 16.
Click the smaller fixed buckle into the catch with the black locking button 17.
Click the larger sliding buckle 19 into the catch with the red unlocking button 18.
tip
Rear seat functions 2nd row rear seats3rd row rear seats.
warning
Check that the rear seat belts are positioned and operating correctly each time the rear seats are moved.
Estate version third row rear seats
Detach the belt 21 from the hook 24. Slowly unwind the belt 21.
Click the sliding seat belt buckle 22 into the corresponding catch with the red unlocking button 24.
tip
When handling the third-row rear seats, the seat belt strap 21 must always be fastened to hook 24 to prevent damage to the strap or the luggage compartment cover (if fitted to the vehicle).
tip
Rear seat functions 2nd row rear seats3rd row rear seats.
Warnings
The following information applies to the vehicle’s front and rear seat belts.
warning
- No modification must be made to the originally-fitted restraint system components (seat belts, seats and their mountings). For special operations (e.g. fitting a child seat), please contact an approved dealer.
- Do not use devices which give any slack in the belts (e.g. clothes pegs, clips, etc.), as a seat belt which is worn too loosely risks causing injury in the event of an accident.
- Never wear the shoulder strap under your arm or behind your back.
- Never use the same belt for more than one person and never hold a baby or child on your lap with your seat belt around them.
- The belt should never be twisted.
- Following an accident, have the seat belts checked and replaced if necessary. Always replace your seat belts as soon as they show any signs of wear.
- When the rear bench seat is being put back, make sure that the seat belts and buckles are correctly positioned so that they can be used properly.
- Make sure that the seat belt buckle is inserted into the appropriate catch.
- Ensure that no objects are placed in the area around the seat belt catch as they could prevent it from being properly secured.
- Make sure the seat belt catch is properly positioned (it should not be hidden away, crushed or flattened by people or objects).