To fold down the seatback

Ensure that the front seats are far enough forward.

Lower the headrests fully Rear headrests.

Place the seat belts in their guides A.

Pull the tab 1 and lower the seatback B.

tip

Before moving the seatback, put seat belt in belt guide A to avoid damaging it.

13008_P1310_002_1_image.jpeg

Depending on the vehicle, to unlock the bench seat C, simultaneously pull the tabs 1 to unlock from the inside.

To replace the seatback, proceed in the reverse order to removal.

Refit the seatback and click it back into place.

warning

For safety reasons, carry out any adjustments while the vehicle is stationary.

warning

When refitting the seatback, make sure it is correctly locked in place.

If seat covers are fitted, make sure these do not prevent the seatback latch from locking in.

Make sure that the seat belts are positioned correctly.

Reposition the headrests.

warning

When moving the rear seats, ensure that nothing obstructs the anchorage points (passenger's arm or leg, a pet, gravel, cloth, toys, etc.).

warning

Check that the rear seat belts are positioned and operating correctly each time the rear bench seat is moved.

warning

To avoid all risk of injury, ensure that nobody is in the proximity of the moving parts.

warning

Make sure that the seatback is correctly locked. If necessary, remove any obstacles behind the seats. Repeat the procedure until the seat is correctly locked.