The presence and operation of the warning lights VARY ACCORDING TO THE EQUIPMENT AND COUNTRY.

warning

If no lights or sounds are apparent, this indicates a fault in the instrument panel. This indicates that it is essential to stop immediately (as soon as traffic conditions allow). Ensure that the vehicle is correctly immobilised and contact an approved Dealer.

warning

For your own safety, the 1_ALL_040_1_pictogramme.png warning light requires you to stop immediately, as soon as traffic conditions allow. Switch off the engine and do not restart it. Call an approved Dealer.

tip

Warning light 1_ALL_036_1_pictogramme.png means you should drive very carefully to an authorised dealer as soon as possible. If you fail to follow this recommendation, you risk damaging your vehicle.

Display

11038_P1310_002_1_image.jpeg

Depending on the vehicle, the warning lights appear on instrument panel A or B and on display C.

Operation

The warning lights appear on the instrument panel to visually indicate the operating status of a system or function:

  • It warns you that an operating fault is detected
  • It informs you of the activation/deactivation/standby status of a function or system

Depending on the situation, the warning light may be:

  • fixed and/or flashing;
  • Accompanied by a message on the instrument panel;
  • accompanied by a beep.
  • Displayed, depending on the operating status, in several colours.

Note: some warning lights are illuminated when the ignition is switched on or when the engine is started, then they switch off after a few seconds.

For more information, see the relevant paragraph.