Media Display & Media Nav

From the main menu, press or to browse to the "Settings" world.

The following settings are available:

• "Audio settings";
• "Phone settings";
• "Vehicle settings";
• "Time settings";
• ...

Audio settings

From the "Settings" world.

Select the "Audio setting" menu, "Audio settings", then to confirm.

The following settings are available:

• "Equaliser";
• "Spatialisation";
• "Volume mph (km/h)";
• « Bass boost » ;
• "Reset".

"Equaliser"

Select "Equaliser", then press or to access the various options in the following order:

• « Bass » ;
• "Medium";
• « Treble ».

"Spatialisation" (sound distribution)

The "Spatialisation" function to adjust the sound distribution in the passenger compartment:

• "Balance" (left/right sound distribution);
• depending on the vehicle; "Fader" (front/rear sound distribution).

You can change the value of each setting by pressing or .

Press to confirm and return to the previous selection.

"Volume sensitive to speed"

The volume of the audio system varies in relation to the vehicle speed.

Access the "Audio setting" menu, then confirm "Volume mph (Km/h)" by pressing .

To reach the desired setting, select one of the following:

• « OFF » ;
• "Very low";
• « Low » ;
• « Middle » ;
• "High";
• « Very high ».

« Bass boost »

The "Bass boost" function can be used to increase the bass when listening at low volume.

Access the "Audio setting" menu, then confirm "Bass boost" by pressing or , then press to confirm.

To activate/deactivate this function, select "Activated" or "Deactivated" by pressing or , then to confirm.

"Default audio"

From the main menu, press or to browse to the "Settings" world. Display the "Audio setting" menu and select "Audio settings", then "Reset".

Select "YES" or "NO".

All the audio settings return to their default values.

Radio settings

Display the Settings menu by briefly pressing on , select the "Settings" world, then "Audio setting", "Radio settings" by pressing or , then to confirm.

The available functions are as follows:

• "Update FM list";
• "Update DR list";
• « Simulcast » ;
• "Priority to DR";
• « TA » ;
• « AF ».

"Update the "FM" list

This feature allows you to perform an update of all FM stations in the area where you are located.

From the "Settings" world, select the "Radio settings" menu, then "Update FM list" by pressing or , then to confirm.

Automatic updating of the FM stations in the area will begin. The "Update FM list" message is displayed on the instrument panel.

Once the update is complete, the "FM list updated" message is displayed on the screen.

"Update the "DR" list

This feature allows you to perform an update of all DR stations in the area where you are located.

From the "Settings" world, select "Audio setting", "Radio settings", then "Update DR list" by pressing or , then to confirm.

Automatic updating of the DR stations in the area will begin. The "Update DR list" message is displayed on the instrument panel.

Once the update is complete, the "DR list updated" message is displayed on the screen.

Note: if another source is selected by pressing , the FM or DR radio list will be updated in the background.

« Simulcast »

Depending on the country, this function switches from a DR station to the equivalent FM station if the digital signal is lost.

If the "FM/DR simulcast" is activated, there may be lag of a few seconds when switching from FM to DR or from DR to FM There may also be a difference in the sound volume.

The system will automatically switch back to DR as soon as the digital signal is received.

Note: during the simulcast, the station name is preceded by "FM>".

"Priority to DR"

Depending on the country, this function allows you to select an FM station (if the radio station requested is also available in digital) and switch to the equivalent DR station to obtain better sound quality.

Note: while DR is prioritised, the station name is preceded by "DR>".

« TA »

When this feature is activated, your audio system searches for and automatically plays traffic bulletins as new reports are broadcast by some "FM" or "DR" radio stations.

To activate or deactivate this function:

• from the "Settings" world, select the "Audio setting" menu, then "Radio settings" using or , then to confirm;
• select "TA" by pressing the control on the steering column, then to confirm;
• select "ON" or "OFF" to activate or deactivate the "TA" function.

"AF" (automatic retuning AF)

The frequency of an FM station changes according to the geographical area.

Some stations use the RDS system, mainly for automatic retuning of "AF" while the vehicle is moving.

Phone Settings

Use this function to adjust the settings of the telephone connected to the audio system.

From the main menu, press or to browse to the "Settings" world. Select "Phone settings", then to confirm.

The following settings are available:

• "Search a phone";
• "Pair a phone";
• "Select a phone";
• "Delete a phone";
• "BT ON/OFF".

Please refer to the corresponding sections.

"BT settings" (Bluetooth®)

From the main menu, press or to browse to the "Settings" world. Select "Phone settings", "BT ON/OFF" then to confirm.

To activate Bluetooth® for the audio system, select "Activated" by pressing or , then to confirm.

To deactivate Bluetooth® for the audio system, select "Deactivated" by pressing or , then to confirm.

Selecting a language

Use this function to change the audio system display language on the instrument panel.

Display the settings menu by pressing . Select the "Settings" world, "Vehicle setting" and "Language", then select the desired language by pressing or and press to confirm.

Setting the time

This function allows you to set the time.

Display the settings menu by pressing . Select the "Settings" world, "Time setting" using or then to confirm.

The "Clock" menu is displayed:

• press and hold to access the Hours setting;
• adjust the hour by pressing or , then wait for a moment until the selection automatically switches from the hour setting to the minute setting;
• set the minutes by pressing or , then wait for a moment until the setting is automatically confirmed.