The " My Safety " function can be used to deactivate or activate a set of driving assistance functions simultaneously.

Depending on the vehicle, you can configure the "My Safety" function from the multimedia screen or from the instrument panel by selecting the driving aid functions to be switched off as a group.

Operation

12000_P1310_001_1_image.jpeg

"ALL ON " mode

Depending on the vehicle, this mode includes the following driving assistance functions:

When "ALL ON" mode is activated: the indicator light on button 1 lights up and the "My Safety All ON selected" message appears on the instrument panel to confirm this. The driving aids that are available in the mode are activated.

"Perso " mode

This mode can be used to deactivate or reactivate some driving aid functions that are available in the "ALL ON" mode previously configured via the "My Safety Perso" settings.

With the ignition on, press button 1 twice in succession to activate "Perso" mode.

The first time you press it, the "Press again for My Safety Perso" message appears on the instrument panel. On the second press, the indicator light on the button 1 goes out. "Perso" mode is activated. The "My Safety Perso selected" message is displayed on the instrument panel.

To switch back to "ALL ON" mode, press once on button 1. The indicator light on button 1 lights up.

tip

Depending on the vehicle and on the length of time since the last time the engine was stopped, the "ALL ON" mode is reactivated:

  • when the vehicle is unlocked;

or

  • when a door is opened;

or

  • when the engine is restarted.

Configuration of My Safety Perso

warning

For safety reasons, carry out any adjustments while the vehicle is stationary.

tip

The "My Safety Perso" settings saved for "Perso" mode are stored each time the engine is or when the doors are locked.

Configuration from the multimedia screen 2

12006_P1310_003_2_image.jpeg

Refer to the multimedia instructions for information on accessing the settings.

Configuration from the trip computer

(depending on the vehicle)

12000_P1310_002_1_image.jpeg

  • With the vehicle stationary, press the switch 3 as many times as required to reach the 2_ALL_416_1_pictogramme.png  tab;

or

  • press control 3 and repeatedly press control 4 or 5 to reach the 3_ALL_038_1_pictogramme.png  tab;
  • press switch 6 "OK";
  • repeatedly press control 4 or 5 to reach the 3_ALL_108_1_pictogramme.png menu, then press the 6 "OK" switch;
  • repeatedly press control 4 or 5 to reach the "MY SAFETY PERSO" menu, then press the 6 "OK" switch;
  • select the driving aids to be deactivated or activated from "Perso" mode by repeatedly pressing control 4 or 5, then press the 6 "OK" switch to deactivate or activate the driving aids.