The "My Safety" function can be used to deactivate or activate a set of driving assistance functions simultaneously.

Depending on the vehicle, you can configure the "My Safety" function from the multimedia screen or from the instrument panel by selecting the driving aid functions to be switched off as a group.

Operation

12061_XJI_001_1_image.jpeg

"ALL ON " mode

Depending on the vehicle, this mode includes the following driving assistance functions:

When "ALL ON" mode is activated: the indicator light on button 1 lights up and the "My Safety All ON selected" message appears on the instrument panel to confirm this. The driving aids that are available in the mode are activated.

"Perso " mode

This mode allows you to deactivate or reactivate certain driving aid functions available in the "ALL ON" mode.

With the ignition on, press button 1 twice in succession to activate "Perso" mode.

The first time you press it, the "Press again for My Safety Perso" message appears on the instrument panel. On the second press, the indicator light on the button 1 goes out. "Perso" mode is activated. The "My Safety Perso selected" message is displayed on the instrument panel.

To switch back to "ALL ON" mode, press once on button 1. The indicator light on button 1 lights up.

tip

Depending on the vehicle, according to the length of time following the last time the engine was stopped, the function is reactivated:

  • when the vehicle is unlocked;

or

  • when a door is opened;

or

  • when the engine is restarted.

Configuration of " My Safety Perso "

warning

For safety reasons, carry out any adjustments while the vehicle is stationary.

tip

The "My Safety Perso" settings saved for "Perso" mode are stored each time the engine is or when the doors are locked.

Vehicle fitted with a multimedia screen

12061_XJI_002_1_image.jpeg

On vehicles equipped with the multimedia screen 2, the "My Safety Perso" setting is not available.

Press button 1 twice in succession: all of the driving aid functions available in "ALL ON" mode will be deactivated. The "My Safety Perso selected" message is displayed on the instrument panel.

Vehicle not fitted with a multimedia screen

(depending on the vehicle)

Configuration from the trip computer 3

  • With the vehicle stationary, press the switch 4 as many times as required to reach the 2_ALL_416_1_pictogramme.png  tab;

or

  • press control 4 and repeatedly press control 5 or 6 to reach the 3_ALL_038_1_pictogramme.png  tab;
  • press the 7 "OK" switch
  • repeatedly press control 5 or 6 to reach the 3_ALL_108_1_pictogramme.png menu, then press the 7 "OK" switch;
  • repeatedly press control 5 or 6 to reach the "DRIVING ASSIST" menu, then press the 7 "OK" switch;
  • repeatedly press control 5 or 6 to reach the "My Safety Perso" menu, then press the 7 "OK" switch;
  • press the 7"OK" switch again to activate or deactivate the driving aids.