Luggage cover

To unfold the luggage compartment cover

Pull slightly on the handle 1 and place each end of the cover in the notch 3 (intermediate position).

From the intermediate position, lift the cover, pull the handle 1 slightly and place each end of the cover in the notch 4.

warning

Do not place any heavy or solid objects on the luggage compartment cover. These may pose a risk to the vehicle occupants if the driver has to brake suddenly or if the vehicle is involved in an accident.

Removing the luggage compartment cover

Slide section 2 (movement A) and lift the right-hand side (movement B) of the roller at the same time.

Then lift the left-hand side of the roller and then remove the assembly.

Refitting the luggage compartment cover

To refit the luggage cover, carry out this procedure in reverse.

Luggage compartment storage space and fittings

Mobile floor 1

Raised position

Enables you to flatten the floor by folding down the back of the rear bench seat and to compartmentalise the boot into two distinct spaces.

The mobile floor is positioned on the runner 2.

tip

Maximum load allowed on the mobile floor in the raised position: 100 kg evenly distributed.

Lowered position

This allows for more space to store things in the luggage compartment and transport heavy loads.

  • Remove the mobile floor 1;
  • place it in the luggage compartment underneath the runner 2.

13023_P1310_002_1_image.jpeg

Compartmentalised position

This enables you to compartmentalise the luggage compartment into two separate spaces.

Transporting objects in the luggage compartment

Always position the objects transported so that the largest surface is against:

13029_P1310_002_1_image.jpeg

the rear bench seatbacks, for normal loads (example A);

the front seatbacks with the rear seatbacks folded down, as is the case for maximum loads (e.g. B).

Ensure that the objects being transported are evenly distributed throughout the loading area.

If you have to place objects on the folded seat back, it is vital that you remove the headrests before folding the seat back so that it can be folded as flat as possible against the seat.

13029_P1310_001_1_image.jpeg

warning

Always position the heaviest items directly on the floor in a low position Luggage compartment storage space and fittings/ If the vehicle is equipped, use the lashing points 1 located on the luggage compartment floor. The luggage should be loaded in such a way that no items will be thrown forward and strike the occupants if the driver has to brake suddenly. Fasten the rear seat belts, even if the seats are not occupied.