Dacia Logan
Accessing the tools
The presence of the tools depends on the vehicle.
Jack 1
To use the jack, loosen the nut 5. When storing the jack, fold it correctly and replace it in its housing Tighten the nut 5 to secure the jack.
warning
Do not leave the tools unsecured inside the vehicle as they may be projected during braking. After use, make sure the tools are correctly positioned in their housings: avoid the risk of injury.
If bolts are supplied with the emergency spare wheel, it is imperative that they are used and that they are used for the emergency spare wheel only: refer to the label affixed to the emergency spare wheel.
Hubcap tool 2
This tool is used to remove the wheel trims.
Towing eye 3
Wheelbrace 4
This can be used to lock or unlock the wheel bolts and the towing eye 3.
warning
For your safety, the use of a jack not recommended by the manufacturer is strictly prohibited.
The jack is specific to the vehicle and used to change the wheels.
Under no circumstances should it be used:
- on another vehicle;
- to carry out a repair;
- to access the underside of the vehicle.
Risk of injury.
Risk of damage to the vehicle.