Side lights

2_ALL_127_1_pictogramme.png

Turn the ring 2 until the symbol is opposite the mark 3.

An indicator light on the instrument panel will come on

tip

When driving on the left-hand side of the road in a left-hand drive vehicle (or vice versa), you must adjust your headlights for the length of your stay Headlight beam adjustment.

Daytime running lights function

11014_XJI_034_1_image.jpeg

(front lights only)

If fitted on the vehicle, the daytime running lights come on automatically with no action on stalk 1 when the engine is started, and they go off once the engine is switched off.

Special feature: Daytime running light will go out automatically when the indicator is in operation.

warning

Before driving at night, check that the electrical equipment is operating correctly and adjust the headlight beams (if your vehicle is not carrying its normal load). As a general precaution, check that the lights are not obscured (by dirt, mud, snow or objects being transported).

11014_XJI_034_1_image.jpeg

Dipped beam headlights

2_ALL_008_1_pictogramme.png

Manual operation

Turn the ring 2 until the symbol is opposite the mark 3. This indicator light on the instrument panel comes on.

Automatic operation

(depending on the vehicle)

Rotate the ring 2 until the AUTO symbol is aligned with the mark 3: with the engine on, the dipped beam headlights switch on or off automatically according to the exterior light level, without any action on the stalk 1.

tip

Always make sure that:

  • the windscreen is not obscured (dirt, mud, snow, condensation, etc.);
  • the light sensor 5 is not obscured (by dirt, objects, etc.).

Main beam headlights

2_ALL_090_1_pictogramme.png

With the engine running and the dipped beam headlights on, push the stalk 1. This indicator light on the instrument panel comes on.

To return to the dipped beam headlights position, pull the stalk 1 towards you again.

Switching off the dipped beam headlights

There are two possibilities:

  • manually, move the ring 2 to position 2_ALL_127_1_pictogramme.png or, depending on the vehicle, to position 0;
  • the lights will go out automatically when the engine is switched off, the driver's door is opened or the vehicle is locked. In this case, when you start the engine the lights will be switched back on according to the position of the ring 2, taking into account the exterior light level, without moving the stalk 1.

Lights-on reminder audible alarm

If the lights are on after the engine is switched off, a warning beep sounds when the driver’s door is opened to warn you that the lights are still on (to avoid draining the battery).

Welcome and goodbye function

(depending on the vehicle)

Once the function is activated, the daytime running lights and the rear side lights will light up automatically upon detection of the card or when the vehicle is unlocked.

They switch off automatically:

  • approximately one minute after lighting up;
  • when starting the engine, based on the position of the lighting stalk;

or

  • upon locking the vehicle.

Activating/deactivating the function

To activate or deactivate the external welcome function, please see the multimedia instructions.

Choose "ON" or "OFF".

11014_XJI_035_1_image.jpeg

Front fog lights

2_ALL_004_1_pictogramme.png

Turn centre ring 4 on the stalk 1 until the symbol faces mark 3, then release it.

Operation of the fog lights depends on the exterior lighting selected, and an indicator light will light up on the instrument panel.

Rear fog light

2_ALL_003_1_pictogramme.png

Turn centre ring 4 on the stalk until the symbol faces mark 3, then release it.

Depending on the vehicle, the stalk returns to the initial position or stays in position.

Operation of the fog lights depends on the exterior lighting selected, and an indicator light will light up on the instrument panel.

To avoid inconveniencing other road users, remember to switch off this light when it is no longer needed.

tip

When driving in fog or snow, or when transporting objects which are higher than the roof, the headlights do not come on automatically.

The fog lights are controlled by the driver: indicator lights on the instrument panel inform you whether they are on (indicator light on) or off (indicator light off).

Turning off the fog lights

There are two possibilities:

  • manually, depending on the vehicle, turn centre ring 4 again until mark 3 is opposite the symbol for the fog light that you wish to switch off. The corresponding indicator light will go out on the instrument panel;
  • the lights will go out automatically when the engine is switched off or the vehicle is locked, and the fog lights when the driver's door is opened.

The front and rear fog lights switch off when the exterior lights are switched off.