Dacia Sandero

101778 km

112.4 km

a) Total mileage and trip mileage recorder.

Average

5.8 L/100

b) Trip settings:

Average fuel consumption.

The value is displayed after having travelled at least 400 metres since the last reset.

Current

7.4 L/100

Current fuel consumption.

Value displayed after reaching a speed of 12 mph (20 km/h), depending on the vehicle.

Range

541 km

Estimated range with remaining fuel.

The value is displayed after driving 400 metres.

Distance

522 km

Distance travelled since last reset.

Average

123.4 km/h

Average speed since last reset.

The value is displayed after driving 400 metres.

Average LPG

--.- L/100

Average LPG fuel consumption

LPG range

--- km

Estimated range with remaining LPG fuel.

LPG distance

--- km

Distance travelled using LPG since the last reset.

56 mph (90 km/h)

c) Current speed (depending on the vehicle).

Petrol mode.

LPG mode.

Service distance

Service in

30 000 Km / 12months

d) Distance before service.

With the ignition on, the engine not running and the display set to "Mileage before service", press the button 2 or 3 for approximately five seconds to display the mileage before service (distance or time to the next service). When the distance or time value approaches its limit, there are several possible scenarios:

• distance or time less than 932 miles (1,500 km) or one month: the "Service due in" message is displayed accompanied by the nearest limit (distance or time);
• range equal to 0 miles (0 km) or date of service reached: the message "Service required" is displayed accompanied by the warning light .

The vehicle requires a service as soon as possible.

Service due in

300 Km / 24days

Service vehicle

Reset: to reset the distance before the next service, press and hold the button 2 or 3 for approximately 10 seconds until the display shows the mileage before service permanently.

Note: if a service is performed without changing the engine oil, only the mileage before the next service should be reset. In the event of an oil change, both the distance before the next service and the next oil change should be reset.

Distance remaining until the next service.

Depending on the vehicle:

• range before service less than 932 miles (1,500 km) or 1 month. The warning light appears on the display.
• range before service 0 miles (0 km) or 0 days. The warning lights and appear on the display.

The warning light appears on the display for a few seconds when the ignition is switched on and when button 2 or 3 is pressed, if the interval is less than or equal to 932 miles (1,500 km) or one month.

The vehicle requires a service as soon as possible.

Note: the service intervals are independent of the vehicle's maintenance schedule: refer to your vehicle's maintenance documentation.

Reset: to reset the mileage before service, press and hold the service reset button for approximately 10 seconds.

Service distance

Oil change in

30 000 Km / 12months

Mileage before oil change

With the ignition on, the engine not running and the display showing "Mileage before service", press the button 2 or 3 for approximately five seconds to display the mileage before service, then press the button 2 to view the mileage before the next oil change (distance or time remaining before the next service). When the distance or time value approaches its limit, there are several possible scenarios:

• mileage remaining less than 932 miles (1,500 km) or one month: the "Service due in" message is displayed accompanied by the nearest limit (distance or time);
• range equal to0 miles (0 km) or date of oil change reached: the message "Service required" is displayed accompanied by the warning light .

The vehicle requires an oil change as soon as possible.

Service due in

300 Km / 24days

Service vehicle

Depending on the vehicle, the mileage before an oil change varies according to the driving style (frequent driving at low speed, door-to-door journeys, extensive use at idling speed, towing a trailer, etc.). The distance remaining until the next oil change can therefore decrease more quickly in some cases than the actual distance travelled.

Reset: to reset the mileage before the next service, press and hold button 2 or 3 for approximately 10 seconds until the display shows the mileage before oil change permanently.

Note: if a service is performed without changing the engine oil, only the mileage before the next service should be reset. In the event of an oil change, both the distance before the next service and the next oil change should be reset.

Distance remaining until the next oil change.

Depending on the vehicle:

• mileage before oil change service less than 932 miles (1,500 km) or one month. The warning light appears on the display.

mileage before oil change service 0 miles (0 km) or 0 days. The and warning lights appear on the display.

The warning light appears on the display for a few seconds when the ignition is switched on and when button 2 or 3 is pressed, if the interval is less than or equal to 932 miles (1,500 km) or one month.

The vehicle requires an oil change as soon as possible.

Note: depending on the vehicle, the mileage before an oil change varies according to the driving style (frequent driving at low speed, door-to-door journeys, extensive use at idling speed, towing a trailer, etc.). The distance remaining until the next oil change can therefore decrease more quickly in some cases than the actual distance travelled.

The oil change intervals are independent of the vehicle's maintenance schedule: refer to the maintenance document for your vehicle.

Reset: to reset the mileage before oil change, press and hold the oil change reset button for approximately 10 seconds.

Tyre pressure SET TPW

e) Reset the tyre pressures.

Tyre pressure loss warningTyre pressure monitoring system

Reset tyre pressure, press and hold

Reset the tyre pressure.

Tyre pressure loss warningTyre pressure monitoring system

No stored message

f) Trip log.

Successive display:

• information messages (ESC deactivated/activated, STOP and START activated, etc.);
• operating fault messages (check the injection system, check the airbag, etc.).

g) engine coolant temperature.

h) clock and exterior temperature.

Clock and outdoor temperature

Settings

(press and hold)

i) general settings.

Press button 2 or 3 for approximately 5 seconds to select the display language.

Settings

access when the vehicle is stationary

Indicates that to access the "General settings" menu, you must stop the vehicle.

Use AdBlue before 1,491 miles (2,400 km)

j) Estimated mileage with remaining reagent Reagent tank.