Dacia Bigster
Settings
To move the seat forwards or back
Lift and hold the lever 1 to unlock the seat. When the seat is in the required position, release the lever and ensure that the seat is locked in place.
To raise or lower the seat base
(depending on the vehicle)
Move the switch 4 upwards or downwards or, depending on the vehicle, move the handle 2 as many times as necessary upwards or downwards to reach the desired position.
To tilt the seatback
Move the switch 5 forwards or backwards or, depending on the vehicle, lift the handle 3 and tilt the seatback to the desired position. Release the handle at the desired position and make sure that it is locked.
Lumbar adjustment
(depending on the vehicle)
Turn the handle 6 to increase or decrease the support.
warning
After making adjustments, make sure that the seatbacks are correctly locked in place.
warning
For safety reasons, carry out any adjustments while the vehicle is stationary.
We would advise you not to recline the seatbacks too far to ensure that the effectiveness of the seat belts is not reduced.
Make sure that the seatbacks are correctly locked in place.
Nothing should be placed on the floor (area in front of the driver) as these objects may slide under the pedals during sudden braking manoeuvres, thus obstructing their use.
Central armrest 7
(depending on the vehicle)
Heated seats
Depending on the vehicle, with the ignition on, you can activate the heated seats via the multimedia screen 8:
- pressing the
pictogram on the required seat for the first time activates the heating system at maximum power. Three switch-integrated warning lights are illuminated; - a second press decreases the heating to medium power. Two integrated warning lights are illuminated;
- a third press decreases the heating to minimum power. One integrated warning light is illuminated;
- a fourth press turns the heating off.
The system automatically regulates the seat temperature. The passenger seat heater is activated only if the presence of the passenger is detected and the seat belt is fastened.