Selector lever 1

R: reverse gear

Selecting reverse gear

(vehicle stationary)

Vehicle with a manual gearbox: shift the lever to Neutral, then shift the lever to Reverse.

Observe the grid marked on the knob 1 and lift the ring 2 up against the knob in order to engage reverse gear.

This system enables a reduced fuel consumption and lower greenhouse gas emissions.

The system is activated automatically when the vehicle is started.

When driving, the system stops the engine (standby) when the vehicle is at a standstill.

Starting the engine

The card must be in the detection zone 2.

"Stop and steering lock applied" position A

To lock: remove the key 1 and turn the steering wheel until the steering column locks.

To unlock: turn the key and the steering wheel slightly.

Petrol version

For the first 620 miles (1,000 km) do not exceed 80 mph (130 km/h) in the highest gear, or 3,000 to 3,500 rpm.

You can only expect top performance from your vehicle after approximately 1,860 miles (3,000 km).

Service intervals: refer to the vehicle's maintenance document.