Dacia Jogger
Accessing the third row rear seats
- From the second row, pull the tab 1;
- lower the seatback onto the seat base;
- raise the seat until it is vertical.
To put the seat back into its initial position, perform the same procedure in reverse.
warning
To avoid all risk of injury, ensure that nobody is in the proximity of the moving parts.
warning
Make sure that the seatback is correctly locked. If necessary, remove any obstacles behind the seats. Repeat the procedure until the seat is correctly locked.
warning
When refitting the seatback, make sure it is correctly locked in place.
If seat covers are fitted, make sure these do not prevent the seatback latch from locking in.
Make sure that the seat belts are positioned correctly.
Reposition the headrests.
Use restrictions
A
B
warning
It is not permitted to drive with one of the seat backs or a second row seat folded down if a passenger is in one of the third row seats.
The label A is affixed in the vehicle as a reminder.
Risk of injury.
warning
It is not permitted to drive with one of the third row seats folded down if a passenger is in the other third row seat.
The label B is affixed in the vehicle as a reminder.
Risk of injury.
The third row rear seats can be folded down or removed for transporting bulky objects.
warning
For safety reasons, carry out any adjustments while the vehicle is stationary.
To fold down the seats
- Ensure that the rear seat belts are correctly positioned on the hooks 2;
- lower the headrests Rear headrests;
- unlock the controls 3, press on the middle of the seat backs and lower the seatbacks onto the base;
- pull the straps 4 to release the seats and raise the seat base until it is vertical.
tip
Ensure that each strap 4 is securely fixed in its ring 5.
Risk of damage.
To reposition the seats
- Ensure that the rear seat belts are correctly positioned on the hooks 2;
- lower the seat base until it locks in position;
- unlock the controls 3 while pressing on the top of each seatback and raise the seatbacks;
- make sure that the seat base and seatbacks lock into position correctly.
warning
No person or animal should be on the third row rear seats if the luggage compartment cover is not removed.
warning
Check that the rear seat belts are positioned and operating correctly each time the rear bench seat is moved.
warning
When moving the rear seats, check that the anchoring points are clean (they must be free from grit, cloths, toys, etc.)
To remove the seats
- Ensure that the rear seat belts are correctly positioned on the hooks 2;
- fold down the second row seats2nd row rear seats;
- lower the headrests Rear headrests;
- unlock the controls 3 press on the middle of the seat backs and lower the seatbacks onto the base;
- pull the straps 4 to release the seats and raise the seat base until it is vertical;
tip
Ensure that each strap 4 is securely fixed in its ring 5.
Risk of damage.
- unlock controls 6;
- lift the seats in order to remove them using the rear side doors. You can then remove them from the vehicle.
warning
Check that the rear seat belts are positioned and operating correctly each time the rear bench seat is moved.
To install seats
- Ensure that the rear seat belts are correctly positioned on the hooks 2;
- fold down the second row seats2nd row rear seats;
- reposition the seats in relation to the hooks 7 on the floor via the rear side doors;
- lower the seat base until it locks in position;
- unlock the controls 3 while pressing on the top of each seatback and raise the seatbacks;
- make sure that the seat base and seatbacks lock into position correctly.
warning
When moving the rear seats, check that the anchoring points are clean (they must be free from grit, cloths, toys, etc.)