Transporting objects in the luggage compartment

Always position the objects transported so that the largest surface is against:

13029_RJI_003_1_image.jpeg

the rear bench seatbacks, for normal loads (example A);

the front seats when the rear seats are folded down Rear seats (example B).

Ensure that the objects being transported are evenly distributed throughout the loading area.

If you have to place objects on the folded seat back, it is vital that you remove the headrests before folding the seat back so that it can be folded as flat as possible against the seat.

warning

Always position the heaviest items directly on the floor. If the vehicle is equipped, use the lashing points 1 located on the luggage compartment floor. The luggage should be loaded in such a way that no items will be thrown forward and strike the occupants if the driver has to brake suddenly. Fasten the rear seat belts, even if the seats are not occupied.

13029_RJI_005_1_image.jpeg

Luggage compartment storage space and fittings

Anchorage points

The anchorage points 1 located in the luggage compartment allow loads to be secured.

tip

Always position objects being transported so that the heaviest items are resting against the back of the rear bench seat.

13023_RJI_001_1_image.jpeg

warning

Always position the heaviest items directly on the floor. If the vehicle is equipped with anchorage points on the luggage compartment floor, use them. The luggage should be loaded in such a way that no items will be thrown forward and strike the occupants if the driver has to brake suddenly. Fasten the rear seat belts, even if the seats are not occupied.

Luggage cover

How to remove luggage cover 1

13010_RJI_001_1_image.jpeg

Pull luggage cover 1 gently towards you, holding it by the ends (movement A), to release the pins from their mounting points located on each side of the luggage compartment.

Use the ends to guide the luggage cover as it rolls up.

Removing/refitting the luggage cover

13010_RJI_002_1_image.jpeg

Push the luggage cover to the right (movement B) and lift the left-hand side of the inertia reel.

To refit the luggage cover, insert the right-hand side, then push it to the right and lower the left-hand side of the reel into its housing.

warning

No person or animal should be on the third row rear seats if the luggage compartment cover is not removed.

Luggage compartment cover storage

13010_RJI_003_1_image.jpeg

You can store the luggage cover 1 directly on the floor.

To do this, remove the cover 2 and insert the left-hand side of the folded luggage cover 1 into the housing 3.

warning

Do not place any objects, especially heavy or solid objects on the luggage cover. These may pose a risk to the vehicle occupants if the driver has to brake suddenly or if the vehicle is involved in an accident.