Vehicles fitted with a multimedia screen.

The time and exterior temperature are displayed on the multimedia screen 1.

Refer to the multimedia instructions.

Vehicles not fitted with a multimedia screen

Press switch 2 as many times as required to reach the "Vehicle" tab.

Repeatedly press control 3 or 4 to set the clock.

Press and hold switch 5 "OK" until the time display flashes.

Set the hour using the 3 or 4 control, then wait for three seconds: the minutes will flash.

Set the minutes using the 3 or 4 control, then wait for three seconds: the flashing stops and the time setting is complete.

Exterior temperature indicator

Special feature:

When the exterior temperature is between – 3 °C and+3 °C, the °C characters flash (signalling a risk of ice on the road).

tip

If the power supply is cut (battery disconnected, supply wire cut, etc.), the clock must be reset.

We recommend that you do not adjust these settings while driving.

warning

Exterior temperature indicator

As ice formation is related to climatic exposure, local air humidity and temperature, the external temperature alone is not sufficient to detect ice.