Trip computer 1

11021_XJI_150_1_image.jpeg

Depending on the vehicle, this includes the following functions:

  • mileage;
  • trip settings;
  • information messages;
  • operating fault messages (related to the 1_ALL_036_1_pictogramme.png warning light);
  • warning messages (related to the 1_ALL_040_1_pictogramme.png warning light);
  • vehicle settings customisation menu Vehicle settings personalisation menu.

Display selection keys 2 or 3

Scroll through the following information by repeated short presses on button 2 or 3 (the display depends on the vehicle equipment and country):

a) total mileage and trip mileage recorder;

b) trip settings:

  • average consumption;
  • current fuel consumption;
  • estimated mileage with remaining fuel;
  • mileage;
  • average speed;
  • average LPG consumption;
  • estimated range with remaining LPG fuel;
  • LPG distance;

c) current speed;

d) mileage before service and oil change;

e) reset the tyre pressures;

f) trip log, operating fault and information message readout;

g) engine coolant temperature;

h) clock and exterior temperature;

i) general settings;

j) estimation with remaining reagent.

Trip mileage resetting

With "trip mileage recorder" selected on the display, press on button 2 or 3 until the mileage recorder resets to zero.

Resetting the journey parameters (reset button)

With one of the journey parameters selected on the display, press button 2 or 3 until the display resets.

Interpreting some of the values displayed after resetting

The values showing average fuel consumption and average speed will become more stable and reliable the further you have travelled since the last time the Reset button was pressed.

The average fuel consumption may decrease when:

  • the vehicle stops accelerating;
  • the engine reaches its operating temperature (if the engine was cold when the reset key was pressed);
  • when driving from an urban area onto the open road.

Automatic resetting of the journey parameters

Resetting occurs automatically when the maximum value of any of the parameters is exceeded.