Combustion engine coolant
With the engine off and the vehicle on flat ground, the level when cold must be between the "MINI" and "MAXI" marks on the coolant reservoir 1.
Top this level up when cold before it reaches the "MINI" mark.
Frequency of checking coolant level
Check the coolant level regularly (very severe damage is likely to be caused to the engine if it runs out of coolant).
If the level needs to be topped up, only use products approved by our Technical Department which ensure:
- antifreeze protection;
- anti-corrosion protection of the cooling system.
warning
No operations should be carried out on the cooling circuit when the combustion engine is hot.
Risk of burns.
Replacement intervals
Refer to the maintenance document for your vehicle.
tip
If there is an abnormal or repeated drop in the fluid level, consult an approved dealer.
warning
When working close to the combustion engine, be aware that it may be hot. The engine cooling fan may also start at any moment. The
label in the engine compartment reminds you of this.
Risk of injury.
Electric traction system coolant
(hybrid version)
This system is different to that of the combustion engine. It is used for cooling the electric motor.
Reading the level
With the ignition off and the vehicle parked on level ground, unscrew the coolant reservoir cap 2.
The level when cold must be between the "MIN" 3 and "MAX" marks 4 shown on the inside of the funnel.
Frequency of checking coolant level
Check the coolant level regularly (very severe damage is likely to be caused to the electrical circuit if it runs out of coolant).
If a top-up is required, you must contact an approved dealer to perform the top-up.
Replacement intervals
Refer to the maintenance document for your vehicle.