"Driving assistance" menu

warning

These functions provide additional driving aids.

Therefore, under no circumstances can they replace the driver's vigilance and responsibility (the driver must always be ready to brake).

warning

For safety reasons, carry out any adjustments while the vehicle is stationary.

tip

Some driving aid services are only available by subscription and accessible during a defined time period. You can extend your subscription period via the www.mydacia.com website.

tip

Some settings have to be modified while the engine is on in order for them to be stored by the multimedia system.

Introduction

The vehicle is equipped with driving aids that offer additional assistance when driving your vehicle.

Please refer to the vehicle user manual for further information.

Note: some "Driving assistance" settings are available while the vehicle is stationary.

Access the "Driving assistance"

From the "Vehicle" world , select "Driving assistance" then the "Security" tab A for safety-related driving aids or the "Comfort" tab B for comfort-related driving aids.

The "Parking" tab C is intended for parking aids.

For more information on the "Parking" tab C, please refer to the section on "Parking aids") Parking aids.

«  Security  »

Using the "Security" tab A, you can activate/deactivate and/or configure the safety-related driving aids:

  • "All on" 1;
  • « Perso » 2 ;
  • « Configure My Safety Perso » 3 ;
    • « Overspeed audible warning » ;
    • « Limitation change sound » ;
    • « Lane departure prevention » ;
    • "Operations on broken lines";
      • « Departure anticipation » ;
      • « Vibration » ;
    • "Emergency lane departure prevention";
    • « Blind spot warning » ;
    • « Driver monitoring alert ».
    • "Driver attention warning";
    • "Driver fatigue warning";
  • « Traction control » ;
  • « Active braking» ;
    • « Warning anticipation » ;
  • « Blind spot warning » ;
  • ...

Note: the activate/deactivate button is highlighted when the function is activated.

"My Safety"

"All on" 1

When My Safety "All on" is activated, all your safety aids are activated. This mode is activated by default each time the vehicle is started.

The My Safety "All on" function can also be activated by pressing your vehicle's control once.

For more information on the control, please see the "My Safety" section in your vehicle user manual.

« Perso » 2

When the My Safety "Perso" function is activated, the safety aids that you have configured and customised using "Configure My Safety Perso" 3 are enabled.

The My Safety "Perso" function can also be activated by pressing your vehicle's control twice.

For more information on the control, please see the "My Safety" section in your vehicle user manual.

« Configure My Safety Perso » 3

From this menu, you can select and/or configure the functions that you want to enable when you activate My Safety "Perso":

  • « Overspeed audible warning » ;
  • « Limitation change sound » ;
  • « Lane departure prevention » ;
  • "Operations on broken lines";
    • « Departure anticipation » ;
    • « Vibration » ;
  • "Emergency lane departure prevention";
  • « Blind spot warning » ;
  • « Driver monitoring alert » ;
  • "Driver attention warning";
  • "Driver fatigue warning";
  • ...

« Overspeed audible warning »

This function warns the driver with an audible alert when the vehicle exceeds the authorised speed limit.

« Limitation change sound »

This function warns the driver by an audible alert when the authorised speed limit changes.

« Lane departure prevention»

This function enables vibrations on the steering wheel (or by an audible warning, depending on equipment) to warn the driver if the vehicle strays out of lane and breaches a line (continuous or broken) without the direction indicators having been activated.

For further information, please refer to the "Lane Departure Warning" section in the vehicle user manual.

"Operations on broken lines"

This function corrects the vehicle's trajectory when it strays out of lane and crosses a broken line without the direction indicator lights having been activated if there is an imminent risk of impact (e.g. risk of hitting another vehicle when changing lanes without the direction indicator lights having been activated).

You can choose the desired vehicle system sensitivity:

  • « Early » ;
  • « Standard » ;
  • « Late ».

You can also choose the desired vibration intensity:

  • « Low » ;
  • « Standard » ;
  • « High ».

"Emergency lane departure prevention"

This function warns the driver by vibrations on the steering wheel (or an audible alert, depending on equipment) when the vehicle strays out of lane and breaches line (continuous or discontinuous) without the direction indicator lights having been activated if there is a risk of impact (e.g. risk of hitting another vehicle when changing lanes without the direction indicator lights having been activated).

For further information, please refer to the "Lane Departure Warning" section in the vehicle user manual.

« Blind spot warning »

This function notifies the driver when another vehicle is in their blind spot.

For further information, please refer to the "Blind spot warning" section in the vehicle user manual.

« Driver monitoring alert »

This function detects any reduction in the driver's reactivity. It takes into account:

  • sudden and random movement of the steering wheel;
  • frequent activation of the Lane Keeping Assist warning.

This function notifies the driver via a sound warning and by displaying a warning message on the instrument panel advising the driver to take a break.

For further information, please refer to the "Driver vigilance warning" section in your vehicle user manual.

"Driver attention warning"

This function analyses the behaviour of the driver's face using an interior camera and emits a warning if any distraction is detected.

For further information, please refer to the "Additional driving aid functions" section in your vehicle user manual.

"Driver fatigue warning"

This function analyses the behaviour of the driver's face using an interior camera and emits a warning if any risk of falling asleep is detected.

For further information, please refer to the "Additional driving aid functions" section in your vehicle user manual.

« Traction control »

This function limits the wheelspin of the drive wheels and controls the vehicle when pulling away, accelerating or decelerating.

Note: you can also activate/deactivate this function from the notification centre by pressing the "Traction control" control shortcut.

For further information, please refer to the "Driver correction devices and aids" section in your vehicle user manual.

« Active braking »

From this menu you can activate/deactivate the "Active braking" function. You can also choose the sensitivity of the warning trigger by pressing "Warning anticipation":

  • « Early » ;
  • « Standard » ;
  • « Late ».

For more information, please see the "Advanced safety" section in your vehicle user manual.

«  Comfort  »

Using the "Comfort" tab B, you can activate/deactivate and/or configure the comfort-related driving aids:

  • « Following distance » ;
  • ...

Note: the activate/deactivate button is highlighted when the function is activated.

« Following distance »

This function notifies the driver if they are too close to another vehicle.

For further information, please refer to the "Safe distance alert" section in your vehicle user manual.